DSC1000-LS is mainly composed of auger filler (frequency conversion speed regulation), frame, weighing platform, hanging bag device, bag clamping device, lifting platform, conveyor, electrical control system, pneumatic control system, etc. When the packaging system works, in addition to the manually place bag, the packaging process is automatically completed by the PLC program control, and the procedures of bag clamping, blanking, metering, loose bag, conveying, etc. are completed in turn; The packaging system has the characteristics of accurate counting, simple operation, low noise, less dust, compact structure, convenient installation, safety and reliability, and safe interlocking between the workstations.

Characteristics
Filler		Auger filler (frequency conversion speed regulation)
Count		Weigh as hanging
Control system		Functions such as automatic drop correction, error alarm and fault self-diagnosis, Equipped with a communication interface, easy to connect, network, can be the packaging process at all times monitored and networked management.
Scope of material：Poor fluidity of powders, granular materials.
Scope of application：Chemical, pharmaceutical, feed, fertilizer, mineral powder, electric power, coal, metallurgy, cement, biological engineering, etc
Paramete
Capacity	20-40bag/h
Accuracy	≤±0.2%
Size	500-2000Kg/bag
Power souce	Customized
Pressure air	0.6-0.8MPa.5-10 m3/h
Blowing rat	1000 -4000m3/h
Environment：Temp -10℃-50℃.Humidity＜80%
Accessories
Convey option	1.No 2.Chain conveyor 3.Chain roller conveyo 4.Trolley….
Protection	1.Explosion-proof 2.No explosion-proof
Dust elimination	1.Dust elimination 2.No
Material	1.Steel 2.stainless steel
Shake	1.Up and down(standard) 2.bottom shake

Manually hang the sling of the packaging bag on the hook. Manually put the feeding port of the packaging bag on the unloading barrel of the bag clamper and toggle the proximity switch of the bag clamp to automatically clamp the bag,lift The platform rises automatically press start and press start automatically to start fast feeding(During the feeding process, the platform can be lowered automatically or manually to vibrate the material bag, and put the material bag on the vibrating platform After vibrating, the platform rises to continue filling) reach the large feeding set value, the feeder automatically transfers to slow feeding - after full weighing, the feeding stops to complete the measuring process - the lifting platform automatically descends - the bag clamper is automatically released. The hook is automatically released and reset automatically - the conveyor sends out the forklift to transport the material bag - repeat the above cycle. The analog signal of the load cell is converted into the digital signal of the controller through the analog to digital converter, and the digital signal has a corresponding switch signal; the PLC collects the switch signal of real time feedback and uses a logic program to make the bag, hook, platform lift, and size give. Material valve, drum bag dust removal and other actions are automatically completed according to the set logic to realize quantitative filling of materials. After packaging, the control of the chain conveyor does not follow the weighing control process. The PLC and controller have 485 and Ethernet ports that conform to the Modbus communication protocol, which can be connected to the user's host computer or DCS system to realize remote data reading or control.